Keep your EV scooter shiny
EV scooters live outside in sun, rain and dust. A simple routine keeps the panels clean, glossy and protected.
Most EV bikes and scooters are parked outside all day. Sun fades the plastic panels, rain leaves water marks and dust settles in every corner. The panels are mostly plastic, so they need gentle products and a little care.
Before you start
- Switch the scooter off and let it cool down if you have just ridden it.
- Keep water away from the charging port, the battery area and the electrical connections. Use a gentle spray or a bucket, not a high-pressure jet.
- Work in the shade so nothing dries too fast.
Step 1: Wash
EV Bike & Scooter Shampoo is a pH-neutral 2-in-1 wash and wax. Its thick snow foam lifts dust and mud so you can wipe it away without scratching the panels. Rinse and dry with a clean microfiber towel.
Step 2: Polish and protect
EV Bike & Scooter Polish is a 5-in-1 multi-surface polish. It gives a hi-gloss, non-greasy shine with a UV shield against fading. It works on plastic, rubber and vinyl, as well as seats, tyres and alloy rims.
Spread a little on an applicator pad, work it in, then buff with a clean & dry microfiber towel.
Do the seat and the footboard last. They collect the most dirt, and you do not want to carry it onto the clean panels.
A simple routine
- Every few days: wipe off dust with a dry, clean microfiber towel.
- When it gets dirty: a full wash with the shampoo.
- When the panels look dull: polish again to bring back the shine and UV protection.
The EV Bike & Scooter Detailing Kit has both bottles, an applicator pad and a 500 GSM microfiber towel.
